Accessories & Parts
Everything you need to maintain, repair, upgrade, and optimize your IBC tanks. From replacement valves and gaskets to heating blankets, mixers, and containment systems, we stock parts for every IBC application.
Request a Quote
Get personalized pricing for your needs
Valves
Replacement and upgrade valves for IBC tanks. The valve is the primary dispensing mechanism and one of the most commonly replaced parts on an IBC container. Over time, valves wear from use, chemical exposure, and mechanical stress. A worn valve can cause leaks, drips, and dispensing problems. We stock valves in polypropylene, HDPE, and stainless steel to match every application requirement.
2" Butterfly Valve
Standard discharge valve for most HDPE IBC tanks. Polypropylene body with EPDM seal. Quick quarter-turn open/close operation. Direct replacement for worn factory valves.
Material: Polypropylene / EPDM
Fits: Universal fit for standard IBC outlets
3" Butterfly Valve
Higher-flow valve for applications requiring faster discharge. Common on 330-gallon tanks and industrial configurations. Provides approximately 2.25x the flow rate of a 2-inch valve.
Material: Polypropylene / EPDM
Fits: 330-gallon and large-format IBCs
2" Ball Valve (HDPE)
Full-bore ball valve for viscous liquids. Provides unrestricted flow and is easier to clean than butterfly valves. Available in polypropylene and stainless steel. Recommended for honey, syrups, and thick chemicals.
Material: Polypropylene or stainless steel
Fits: Standard 2-inch IBC outlet
Stainless Steel Ball Valve
304 or 316 stainless steel ball valve for chemical, food, and pharmaceutical applications. Tri-clamp and threaded connections available. Autoclavable for sanitary applications.
Material: 304 or 316 stainless steel
Fits: Stainless steel and HDPE IBCs
Camlock Valve Adapter
Allows connection of standard camlock hoses to IBC valves. Available in 2" and 3" sizes with polypropylene or aluminum body. Essential for quick-connect hose applications.
Material: Polypropylene, aluminum, or stainless steel
Fits: Standard IBC valve threads
Lids & Caps
Replacement lids and screw caps to maintain a proper seal on your IBC tank. A secure lid prevents contamination, evaporation, and spills during storage and transport. Over time, the threads on IBC lids can wear, gaskets can degrade, and tamper-evident seals need replacing. We stock lids for all standard IBC fill openings.
6" Screw Cap (Standard)
Standard 150mm (6") threaded screw cap for IBC fill openings. Polypropylene construction with integrated gasket. Available in vented and non-vented configurations.
Material: Polypropylene with EPDM gasket
Fits: Standard 150mm IBC fill opening
Vented Screw Cap
Allows air exchange during dispensing to prevent vacuum lock. Essential for gravity-feed systems. Includes a pressure relief mechanism. Prevents tank collapse during discharge.
Material: Polypropylene with vent mechanism
Fits: Standard 150mm IBC fill opening
8" Screw Cap
Larger opening for faster filling or manual cleaning access. Less common but available for IBCs with 8-inch fill ports. Useful for applications requiring manual interior access.
Material: Polypropylene with EPDM gasket
Fits: 200mm IBC fill opening
Dust Cap (Valve Cover)
Protective cover for the IBC discharge valve. Prevents contamination and leakage during storage and transport. Snap-on or threaded designs available.
Material: Polypropylene
Fits: Standard 2-inch and 3-inch valve outlets
Tamper-Evident Cap
Sealed cap with a breakable tamper ring that provides visual evidence if the container has been opened. Required for many food and chemical applications.
Material: Polypropylene with tamper band
Fits: Standard 150mm IBC fill opening
Adapters & Fittings
Connect your IBC tank to hoses, pipes, pumps, and other tanks with the right adapter. We carry a full range of thread types and materials. IBC tanks use a unique coarse thread (S60x6) on their valve outlet, so adapters are essential for connecting to standard plumbing, hose systems, and processing equipment.
S60x6 to 1" BSP Male Adapter
Converts the standard IBC coarse thread (S60x6) to 1" BSP male for connecting garden hoses and standard piping. Polypropylene or brass construction.
Material: Polypropylene or brass
Fits: Standard IBC S60x6 thread
S60x6 to 2" BSP Male Adapter
Full-bore 2" adapter for high-flow applications. Maintains maximum flow rate from the IBC discharge opening. Essential for pump connections.
Material: Polypropylene or stainless steel
Fits: Standard IBC S60x6 thread
IBC to Garden Hose Adapter
Converts IBC outlet to standard 3/4" garden hose thread. Popular for rainwater harvesting and irrigation setups. Includes shut-off valve.
Material: Polypropylene with brass insert
Fits: Standard IBC valve outlet
IBC to IBC Connector (Linking Kit)
Connects two IBC tanks together at the valve level for linked storage. Includes shut-off valve for independent isolation of each tank. Doubles your storage capacity.
Material: Polypropylene with stainless steel clamps
Fits: Standard 2-inch IBC valve outlets
Camlock Quick-Connect (2")
Type A, B, C, D, E, and F camlock fittings in 2" for fast hose connections. Polypropylene, aluminum, and stainless steel options available.
Material: PP, aluminum, or stainless steel
Fits: Standard 2-inch connections
Tri-Clamp Adapter
Connects IBC outlets to sanitary tri-clamp piping used in food, dairy, and pharmaceutical processing. Available in 1.5-inch, 2-inch, and 3-inch sizes.
Material: 316 stainless steel
Fits: Sanitary tri-clamp systems
Gaskets & Seals
Replacement gaskets ensure a leak-free seal at the lid and valve. Over time, gaskets degrade from chemical exposure, UV, temperature cycling, and compression set, making replacement essential for maintaining a tight seal and preventing leaks, contamination, and product loss.
6" Lid Gasket (EPDM)
Standard EPDM rubber gasket for IBC screw caps. Chemical-resistant and food-safe. Fits most 150mm IBC lids. Replacement recommended every 1-2 years or when visible wear appears.
Material: EPDM rubber (FDA compliant)
Fits: Standard 150mm IBC lids
6" Lid Gasket (Viton)
Fluoroelastomer gasket for aggressive chemicals, solvents, and high-temperature applications. Superior chemical resistance compared to EPDM. Essential for solvent and acid storage.
Material: Viton (FKM fluoroelastomer)
Fits: Standard 150mm IBC lids
Valve O-Ring Set
Replacement O-ring kit for 2-inch and 3-inch butterfly and ball valves. Includes main seal, backup ring, and washer. Cures most valve leaks without full valve replacement.
Material: EPDM or Viton (specify at order)
Fits: Standard 2-inch and 3-inch IBC valves
PTFE Gasket
Inert PTFE gasket for ultra-pure or highly corrosive applications. Compatible with virtually all chemicals. The gold standard for chemical resistance in gasket materials.
Material: Virgin PTFE (Teflon)
Fits: Standard 150mm IBC lids
Heating Blankets
IBC heating blankets maintain product temperature during storage and processing. Essential for viscous materials, temperature-sensitive chemicals, and cold-weather operations. They wrap around or sit beneath the IBC to provide even, controlled heating with adjustable thermostats for precise temperature management.
Full-Wrap IBC Heating Blanket
Wraps around the entire IBC bottle for uniform heating. Adjustable thermostat from 40F to 160F. Insulated outer layer to minimize heat loss. 120V or 240V options available.
Material: Silicone heating elements with insulated cover
Fits: Standard 275 and 330 gallon IBCs
Base Heater Pad
Heats from the bottom of the IBC tank. Effective for preventing freezing and maintaining pour-ability of viscous products like honey, oils, and resins. Simple plug-in installation.
Material: Silicone heating pad with insulated base
Fits: All IBC pallet sizes
Insulated IBC Cover (No Heat)
Thermal insulation jacket that slows temperature loss without active heating. Ideal for maintaining temperature of pre-heated product during transport. Reduces heat loss by up to 80%.
Material: Multi-layer insulated fabric
Fits: Standard 275 and 330 gallon IBCs
Hazardous Area Heating Blanket
Certified for use in ATEX/Class I Division 2 environments. For flammable or combustible liquid storage areas. Meets explosion-proof requirements for hazardous locations.
Material: Explosion-proof rated heating elements
Fits: Standard IBCs in hazardous zones
Mixers & Agitators
IBC-mounted mixers keep products homogeneous during storage and dispensing. Prevents settling, separation, and stratification of suspensions and emulsions. Available in electric and pneumatic configurations to match your facility requirements and safety classifications.
Lid-Mount Electric Mixer
Mounts through the IBC lid opening. Available with 4" to 12" impellers. Variable speed from 50 to 1,750 RPM. 1/4 HP to 1 HP motors. Ideal for blending and keeping products in suspension.
Material: Stainless steel shaft and impeller
Fits: Standard 6-inch IBC lid opening
Pneumatic IBC Mixer
Air-powered mixer for hazardous environments or facilities with compressed air infrastructure. Intrinsically safe for flammable liquids. No electrical components in the mixing zone.
Material: Stainless steel with pneumatic motor
Fits: Standard 6-inch IBC lid opening
Folding Impeller Mixer
Collapsible impeller design that fits through a standard 6" IBC opening and expands inside the tank. No need for a larger lid. Convenient for tanks that cannot be modified.
Material: Stainless steel folding blades
Fits: Standard 6-inch IBC lid opening
Magnetic Drive Mixer
Seal-less design eliminates the risk of leakage at the shaft. Ideal for corrosive or ultra-pure applications. Magnetic coupling transmits power without a mechanical shaft seal.
Material: 316L stainless steel with magnetic coupling
Fits: Stainless steel IBCs with tri-clamp ports
Liners
Disposable or reusable IBC liners provide an additional barrier between your product and the tank wall. They simplify cleaning, prevent cross-contamination, and can extend tank life. Liners are particularly useful when a single tank needs to be used for different products or when cleaning between batches is impractical.
Standard PE Liner (Form-Fit)
Form-fitting polyethylene liner that conforms to the IBC bottle shape. Single-use, food-grade compatible. Fill and drain through the top opening. Eliminates the need for tank cleaning between products.
Material: Low-density polyethylene (LDPE)
Fits: Standard 275 and 330 gallon IBCs
Foil Liner (Barrier)
Multi-layer foil laminate liner for oxygen-sensitive, light-sensitive, or highly reactive products. Superior barrier properties protect product quality and shelf life.
Material: Aluminum foil / PE laminate
Fits: Standard 275 and 330 gallon IBCs
Aseptic Liner
Pre-sterilized liner for pharmaceutical and food applications requiring aseptic handling. Gamma-irradiated or ETO sterilized. Maintains sterility until point of use.
Material: Multi-layer PE with sterilization treatment
Fits: Standard IBCs with aseptic filling ports
Heated Liner
Liner with integrated heating elements for products that need to be maintained above ambient temperature during storage. Combines containment with temperature control.
Material: PE liner with embedded heating elements
Fits: Standard 275 and 330 gallon IBCs
Stands, Drip Trays & Containment
Elevate your IBC for gravity dispensing, contain spills for regulatory compliance, and organize your storage area with purpose-built stands and trays. These accessories are essential for safe, efficient, and compliant IBC storage and dispensing operations.
IBC Tilt Stand
Steel stand that tilts the IBC forward to allow complete drainage through the bottom valve. Eliminates the 5-10 gallons of liquid that typically remain in a level tank. Maximizes product recovery.
Material: Powder-coated steel
Fits: Standard IBC pallet footprint
IBC Elevation Stand
Raises the IBC 18 to 36 inches off the ground for gravity-feed dispensing into drums, totes, or processing equipment below. Multiple height options available.
Material: Heavy-duty steel with non-slip surface
Fits: Standard IBC pallet footprint
Single IBC Spill Containment Pallet
Polyethylene or steel containment pallet that holds one IBC and captures 110% of its capacity in case of a spill. Required by EPA and local fire codes for chemical storage.
Material: HDPE or steel with PE liner
Fits: Standard IBC pallet footprint
Double IBC Spill Containment Pallet
Side-by-side containment for two IBC tanks. Meets SPCC and EPA 40 CFR 264.175 requirements for secondary containment. Includes removable grating for easy cleaning.
Material: HDPE or steel with PE liner
Fits: Two standard IBCs side by side
IBC Drip Tray
Low-profile tray placed under the IBC valve to catch drips during dispensing. Prevents floor contamination and slip hazards. Easy to empty and clean.
Material: HDPE or stainless steel
Fits: Universal -- fits under any IBC valve
Labels & Identification
Proper labeling is essential for safety, traceability, and regulatory compliance. We carry blank and pre-printed labels designed specifically for IBC tank surfaces. Correct labeling helps prevent misidentification, ensures proper handling, and meets OSHA, DOT, and GHS requirements.
GHS Chemical Labels
Pre-formatted labels for hazardous chemicals compliant with the Globally Harmonized System (GHS). Includes pictogram areas, signal words, and hazard statements. Required for chemical storage and transport.
Material: UV-resistant polyester with adhesive backing
Fits: Adheres to HDPE and steel surfaces
Blank Weatherproof Labels
UV-resistant, waterproof polyester labels for outdoor IBC storage. Compatible with thermal transfer and laser printers. Will not fade, peel, or smear in outdoor conditions.
Material: Polyester with permanent adhesive
Fits: All IBC surfaces
Content Identification Placards
Large-format reusable placards that slide into cage-mounted holders. Easily swapped between fills for tanks that hold different products over time. Available blank or pre-printed.
Material: Rigid PVC or aluminum
Fits: Steel cage-mounted placard holders
DOT Shipping Labels
DOT-compliant hazard class labels for IBCs being transported on public roads. Available for all 9 DOT hazard classes. Required for highway transport of regulated materials.
Material: Vinyl with pressure-sensitive adhesive
Fits: All IBC surfaces
Frequently Asked Questions
How do I know which valve size my IBC tank uses?
Most standard HDPE composite IBC tanks use a 2-inch (DN50) butterfly valve. Some larger tanks, particularly 330-gallon models, may use a 3-inch (DN80) valve. You can measure the outer diameter of your existing valve outlet or check the manufacturer markings on the tank. If you are unsure, contact us with your tank model and we can identify the correct valve size.
What gasket material should I choose?
For general-purpose and food-grade applications, EPDM is the standard choice -- it is chemical-resistant, food-safe, and cost-effective. For aggressive chemicals, solvents, or high-temperature applications (above 200F), choose Viton (FKM). For ultra-pure or highly corrosive environments, PTFE is the best option as it is compatible with virtually all chemicals.
Do heating blankets work with all IBC sizes?
Our full-wrap heating blankets are designed for standard 275-gallon and 330-gallon IBCs. Base heater pads work with any pallet size. If you have a non-standard IBC or need a specific size, contact us and we can source the right heating solution for your tank.
Can I use an IBC liner to avoid cleaning the tank between products?
Yes, that is one of the primary benefits of IBC liners. A disposable liner creates a barrier between your product and the tank wall, allowing you to switch between different products without cleaning the tank itself. This saves time, reduces water usage, and eliminates the risk of cross-contamination.
Are spill containment pallets required by law?
For chemical storage, yes. EPA regulations (40 CFR 264.175) and OSHA standards require secondary containment for hazardous liquids. Local fire codes may have additional requirements. Even for non-hazardous liquids, containment pallets are a best practice for spill prevention and environmental protection.
Do you offer volume discounts on accessories?
Yes. We offer 10% off orders of 25+ units and 20% off orders of 100+ units for most accessory items. Custom kitting and scheduled delivery programs are also available for businesses with recurring parts needs. Contact us at info@ibcsantaana.com for a volume quote.
Bulk & Recurring Orders
If your operation goes through replacement valves, gaskets, liners, or other consumable parts on a regular basis, ask us about bulk pricing and scheduled delivery programs. We can set up recurring orders so you never run out of critical spares.
Many of our customers in food processing, chemical manufacturing, and agriculture maintain a standing order for commonly replaced items. This ensures parts are always on hand when maintenance is needed, minimizing downtime and keeping your operations running smoothly.
We can also assemble custom maintenance kits containing the specific combination of valves, gaskets, and other parts your facility uses most often. These kits ship as a single package, simplifying your procurement and inventory management.
Inquire About Bulk PricingVolume Discounts
10% off orders of 25+ units, 20% off 100+ units
Scheduled Delivery
Weekly, biweekly, or monthly delivery to your facility
Custom Kitting
We can assemble custom part kits for your maintenance team
Net 30 Terms
Qualified businesses can apply for net-30 payment terms
Dedicated Account Rep
A single point of contact for all your parts needs
Cross-Reference Service
We can match part numbers from other suppliers to our inventory
Emergency Stock
We maintain emergency stock of critical parts for same-day fulfillment
Related Products
Not Sure Which Part You Need?
Describe your IBC tank model, the problem you are trying to solve, or the improvement you want to make, and our team will recommend the right accessory. We can also cross-reference part numbers from other suppliers. Email us at info@ibcsantaana.com.